500ml Fluid Extractor Syringe
$15.99latest confirmed price — the stamp shows today's
Half a liter at a time, exactly where it should go — or exactly out of where it shouldn't. The syringe extracts and fills through 2 x 7.8" extension tubes: diff top-offs, brake reservoir draws, power steering swaps, all without a drop on the crossmember.
- 500ml syringe body with twin 7.8" extension tubes
- Pulls fluid out and pushes fresh fluid in — one tool, both directions
- Reaches reservoirs and fill plugs buried in the chassis
- Measured transfer, no siphon taste-test, no spill cleanup
| Brand | BILITOOLS |
|---|---|
| Tool wall | Oil & Fluid Service |
| Latest confirmed price | $15.99 |
| Versions in the family | 1 |
Owner reports
From the people running this tool
THIS HAS SO MANY USES AROUND THE HOME AND AUTOThis syringe is going to get a lot of use!!! It has a 500CC capacity, half a liter or about a pint. It is built with sturdy plastic with a quick disconnect coupler at the end for the hose. I can think of many uses around the shop for this, from sucking oil out of small engines to sucking brake fluid out of the master cylinder to removing and replacing differential and transmission fluid. The syringe has great suction and does not leak down due to the dual …
500cc/16.91 oz Syringe Style Oil Extractor or Fill PumpI had to change the oil on a generator in a tight space and didn't want to risk using a funnel. This is a fluid syringe style device that can pull fluid such as oil out of a container and then pump it into a reservoir. There are two sizes to this particular extractor, 200cc and 500cc. I chose the 500cc or 16.91 oz device. In retrospect, for my particular situation, I think the smaller size might have been better even though I would have to extract/pump oil…
A very nice fluid extractor overall, with just one minor improvement needed!This is a really nice fluid extractor. The 500ml capacity is more than enough for many of the jobs I perform around my home, and it has quickly become one of those tools I reach for regularly. It's perfect for everything from extracting old gas from a tank to adding or removing oil when precise fluid transfer is needed. The syringe creates strong suction, making it easy to transfer fluids without creating a mess. The clear body allows you to see exactly ho…
Great for small engine oil changes & fuel drainingI picked up this 500 mL BILITOOLS fluid syringe mainly for small-engine maintenance—specifically, extracting oil from lawnmowers, pressure washers, and other outdoor power equipment that lack convenient drain plugs. It’s also handy for pulling stale fuel from small tanks before carburetor work or seasonal storage. The double O-ring design provides strong, consistent suction without fluid leaking past the plunger seal, and the included spare set of replace…
Same wall
