O2 Sensor Socket Set
$59.99latest confirmed price — the stamp shows today's
Oxygen sensors live in exhaust heat and seize accordingly. This set stacks 1/2" and 3/8" drive sensor sockets — 29mm pressure/vacuum switch, 1-1/16" (27mm), 7/8" (22mm) wide-slot and more — with the wire slots that let the harness pass while the hex gets full grip.
- 1/2" and 3/8" drive sockets cover 7/8" (22mm) through 29mm sensors
- Slotted bodies clear the sensor pigtail without pinching it
- Vacuum switch and wide-slot profiles for the odd placements
- Full-depth hex engagement on sensors rusted in since the factory
| Brand | BILITOOLS |
|---|---|
| Tool wall | Engine & Timing |
| Latest confirmed price | $59.99 |
| Versions in the family | 1 |
Owner reports
From the people running this tool
ToolsFast shipping and did the job. Good tools.
Great QualityGood quality.
It Worked for MeI really only needed the offset 1/2" drive socket because I needed it to be long enough to go through the heat shield and still grab the oxygen sensor on my older Rav4. I could only use a breaker bar due to space limitations and didn't want to play with the rusty heat shield bolts. So that socket worked perfectly. I could have bought just that socket for $10 but I decided to go for the 5 piece kit for a little more. Just a note - The deep 3/8 silver socket…
Good tool for specialty uses.These are buily tough. I thought I was going to change my Nox sensors in my van and bought these to do that job. I ended up not needing to do that and since I liked the tools quality and can think of several time that I could have saved time with a set like this, I decided to keep this set. New open box but not used.
Same wall
